HPL50 - Ryobi Power Planer OPERATOR'S MANUAL HPL50
HPL51 - RYOBI TECHNOLOGIES INC. power planer HPL51 OPERATOR'S MANUAL
Don't See the Model Number Listed? Ask the membership
for help locating your missing manual.
Member Discussion
on Ryobi Planer
feeding rollers adjustment
All the various chains and sprockets seem to work, but the planer will not self feed a board all of a sudden. they seems tomove,but do not pull the stock through as they have before
Perhaps your rllers need to be cleaned. Make sure your planer is unplugged
Was this comment useful?
RE: feeding rollers adjustment
rollers
Was this comment useful?
rollers
thanks freerobert, Believe it or not I had been wondering if that would help.
Any suggestions as to what would be the best solution to use? also, Hope I marked the right star for,-- Yes it is helpful!
Was this comment useful?
Feed Rollers
My AP10 started to slip on the rollers also. In the manuel, it said to check the rollers for resin build up. If buildup occurs, use a mild nonflameable tar and pitch removal solvent. I just used rubbing alcohol on the rollers which seemed to work. My table surface had some resin on it also, creating a friction between it and the wood. I cleaned the resin of the table with goof off and once it was cleaned well, use paste wax on the surface, which gives you a smoth slide.