Filter
Top Products
448 Chapter5
One-Button Measurement Functions
Trace/View (Multi-Carrier Power Measurement)
One-Button Measurement Functions
5.20.3 Combined View Units
Pressing Combined View Units selects the units (dBc or dBm) for the floating numeric displays
when Combined is selected.
Key Path:
Trace/View
Factory Preset: dBc
History: Added with firmware revision A.02.00
Remote Command:
There is no remote command for this function.
5.20.4 Trace
One-button measurements do not change this function. See “Trace” on page 284 for more
information.
5.20.4.1 Trace
(1 2 3)
Determines which trace the menu keys will affect. Press Trace123until the number of the
desired trace is underlined.
Key Path:
Trace/View, Trace
State Saved: Saved in Instrument State for all traces
History: Added with firmware revision A.02.00
Remote Command:
:TRACe[1]|2|3:MODE WRITe|MAXHold|MINHold|VIEW|BLANk
WRITe =
Clear Write
MAXHold = Max Hold
MINHold = Min Hold
VIEW = View
BLANk = Blank
:TRACe[1]|2|3:MODE?
Example: TRAC:MODE WRIT
TRAC:MODE MAXH
TRAC:MODE MINH
TRAC:MODE VIEW
TRAC:MODE BLANk
TRAC:MODE?