Commissioning
Alcatel Vacuum Technology France - ACT 250 addendum
14
January 2001
RS 232 / 485 serial link
Wiring the RS 232 or
RS 485 serial link
See sheet B 110 in the ATP Series Pump User Manual.
Configuring the RS 232
or RS 485 serial link
The link is configured using switches on the rear panel of
the controller.
01
Switch description 0 1
1 parity type odd even
2 parity no yes
3 baud rate 9600 4800
4 RS type RS 485 RS 232
Factory configuration: 9600 baud, NO parity, RS 232
Use
See the detailed list of commands on page 15