Alcatel Carrier Internetworking Solutions ACT 250 Paint Sprayer User Manual


 
Commissioning
Alcatel Vacuum Technology France - ACT 250 addendum
19
January 2001
Detailed description of RS commands
LEV
Syntax
Result
LNG
Syntax
Result
See also: SHT
Returns the state of the parameters dened by SET
#adrLEV<CR>[<LF>]
#adr,nnnnn,sssss,aaaa,hhhhh or
#adr,nnnnn rpm,sssss rpm,aaaa mA,hhhhh hours
Returns the current values:
nnnnn : speed set point
sssss : stand-by speed
aaaa : max. current set point
hhhhh : alert level for pump bearing maintenance
Returns the strings sent with the identication sub-strings
#adrLNG<CR>[<LF>]
#adr,ok
AVT>
Allows the parameters returned by the DLR, LEV and SPD commands
to be identied with sub-strings. DLR, LEV, SPD.
Also generates the AVT> prompt each time a <CR> character is
received.
NSP
Syntax
Result
See also: RPM, SBY
Switches the speed set point to the nominal speed value
#adrNSP<CR>[<LF>]
#adr,ok
The speed set point for the pump is set to its nominal value.
This conguration is automatically saved in user memory.
This mode of operation prevents the use of the RPM command.