Commissioning
Alcatel Vacuum Technology France - ACT 250 addendum
21
January 2001
Detailed description of RS commands
SBY
Syntax
Result
See also: NSP, RPM
Switches the speed set point to the stand-by value
#adrSBY<CR>[<LF>]
#adr,ok
Resets the stand-by speed to its last stored value, and allows it to be
modified if an “RPM” command is sent.
This configuration is automatically stored in user memory.
SEL
Syntax
Result
Returns the state of the parameters defined by OPT
#adrSEL<CR>[<LF>]
#adr,a,u
a: Reserved
u: Returns the choice of temperature unit::
u = 0: degrees Centigrade u = 1: degrees Fahrenheit
Defines the character which separates the parameters
in a reply
#adrSEPnnn<CR>[<LF>]
3-digit decimal value of the ASCII code of the desired char-
acter (with leading zeros if necessary).
condition: 000 ≤ nnn ≤ 255
#adr,ok or #adr,ErrX if error
Allows the user to select the character which separates
the parameters returned by the DLR, STA and LEV
commands. Default value: comma “,” ASCII code = 044
If ok, the selected value is automatically stored in user memory.
SEP
Syntax
Result