Alpha Tool.Com.HK Limited 225 Grinder User Manual


 
13
WARNING!
1. Before turning the switch ON, make sure the rotating parts are not touching
anything. If the switch is turned ON while they are in contact with anything
else, the wheel may get damaged and may cause injuries.
2. When a new wheel is attached and the switch is turned ON, keep your body
well away from the exposed sides of the wheel for a moment until the machine
reaches its full speed.
It is very dangerous to perform grinding operations using cracked, chipped or damaged
wheels. Before starting grinding operations, keep the wheel away from anyone nearby. Be
sure to perform a few test runs to check whether there are any abnormalities.
Test run duration:
After replacing a wheel..........……………………at least 3 minutes
Before starting operations each day...................at least 1 minute
ABOUT DOUBLE INSULATION
This machine is designed with double insulation. Two insulations are used between the
conductor and the outer body of the machine. An electric machine with the double insulation
highly improves safety from electric shocks. Do not attach or replace unspecifi ed parts and
do not assemble incorrectly. This may cause the insulation to malfunction.
LAWS AND REGULATIONS OF NOISE LEVELS
Please observe local laws and regulations regarding noise level in order to avoid disturbing
surrounding areas. Install a soundproof wall if required to comply with the local laws and
regulations.