Alpha Tool.Com.HK Limited 225 Grinder User Manual


 
5
INTRODUCTION
Thank you for purchasing the Alpha
®
High-Speed Angle Grinder. Please read this instruc-
tion manual thoroughly to ensure safety and correct use of this tool. Keep this manual in
a place where operators can access it easily whenever necessary.
ABOUT THE SYMBOLS
According to the hazard level, all safety notes in this manual are classifi ed into “DANGER”,
WARNING”, and “CAUTION”.
DANGER! Death or serious personal injury is imminent when handling this tool
incorrectly.
WARNING! There is a possibility of death or serious personal injury when
handling this tool incorrectly.
CAUTION! There is a possibility of personal injury or property damage when
handling this tool incorrectly.
NOTE: In some situations, failing to observe WARNING notes could result in death or seri-
ous personal injury. Be sure to read and observe the safety notes to ensure safety
and correct use of the Angle Grinder.
ELECTRICAL SYMBOLS
The following show the symbols used for tool.
V Volts
A Amperes
W Watts
Hz Hertz
~ or a.c. Alternating Current
n0 No load speed
…/min Revolution or reciprocation per minute
kg Kilograms
mm Millimeters
lbs Pounds
Protective Earth