Filter
Top Products
8
SPECIFIC SAFETY RULES
Accessories must be rated for at least the speed recommended on the tool
warning label. Wheels and other accessories running over rated speed can fl y apart
and cause injury.
Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its own cord. Contact with a “live”
wire will make exposed metal parts of the tool “live” and shock the operator.
Know your power tool. Read operator`s manual carefully. Learn its application and
limitations, as well as the specifi c potential hazards related to this tool. Following this
rule will reduce the risk of electric shock, fi re, or serious injury.
Always wear safety glasses with side shields. Everyday eye-glasses have only
impact resistant lenses; they are NOT safety glasses.
Protect your lungs. Wear a face or dust mask if the operation is dusty.
Protect your hearing. Wear hearing protection during extended periods of opera-
tion.
Inspect tool cords periodically and if damaged, have repaired at your nearest Fac-
tory Service Center or other Authorized Service Organization. Constantly stay aware
of cord location.
Check damaged parts. Before further use of the tool, a guard or other part that is
damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other conditions that may affect its opera-
tion, A guard or other part that is damaged should be properly repaired or replaced by
an authorized service center.
Make sure your extension cord is in good condition. When using an extension
cord, be sure to use one heavy enough to carry the current your product will draw.
An undersized cord will cause a drop in line voltage resulting in loss of power and
overheating.
Inspect for and remove all foreign objects from workpiece before polishing.
Follow this rule will reduce the risk of serious personal injury.
Drugs, alcohol, medication, Do not operate tool while under the infl uence of
drugs, alcohol, or any medication. Follow this rule will reduce the risk of electric
shock, fi re, or serious personal injury.
Keep hands away from polishing area. Follow this rule will reduce the risk of cuts,
scrapes, or serious personal injury.
Save these instruction. Refer to them frequently and use them to instruct others who
may use this tool. If you loan someone this tool, loan them these instructions.
USE PROPER EXTENSION CORDS
Use only three-wire extension cords that have three-prong grounding-type plugs and
three-pole receptacles that accept the tool’s plug. Make sure your extension cord is in
good condition. Replace or repair damaged or worn cord immediately. When using an
extension cord, be sure to use one heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line voltage resulting in loss of power and
•
•
•
•
•
•
•
•
•
•
•
•
•