Amplifier Tech 5700 Router User Manual


  Open as PDF
of 1
 
Manual Setup
Quick Install Guide
Package Contents
If any of the above items are missing, please contact your reseller.
DIR-865L Ampli™ Cloud Router 5700
1
2
Position your router close to your modem and a computer.
Place the router in an open area of your intended work area
for better wireless coverage.
3 4
Plug one end of the included blue Ethernet cable that came with your
router into the yellow port labeled INTERNET on the back of the router.
Plug the other end of this cable into the Ethernet port on your modem.
©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link
Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the
property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11ac (draft), 802.11n, and
802.11g specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of
network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental
conditions will adversely aect wireless signal range. Product specications, size and shape are subject to change without notice,
and actual product appearance may dier from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more
details. iPhone, iPad, and iPod touch are registered trademarks of Apple Inc.
Version 1.0 (May 16, 2012)
Power LED - A solid green light indicates a
proper connection to the power supply. The
light will blink green during the WPS process.
The light will blink orange during boot up.
Internet LED - A solid light indicates
connection on the Internet port. If the LED
is orange, the connection is good but the
router cannot connect to the Internet.
WPS Button/LED - Press to start the WPS
process. This LED will blink during WPS
conguration.
DIR-865L
LEDs (from top to bottom)
Turn o and unplug your cable or DSL
broadband modem.
Cloud Router 5700
Start Here
Tips for PPPoE and USB connections:
If you have DSL and are connecting via PPPoE, make sure that you disable or uninstall any PPPoE
software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able
to connect to the Internet.
You can only use the Ethernet port on your modem. If you were using USB to connect before, then
you must turn o your modem, disconnect the USB cable and connect an Ethernet cable to the
Internet port on the router, then turn the modem back on. In some cases, you may need to call
your ISP to change connection types (USB to Ethernet).
DIR-865L
Modem
Computer
12V
3A
USB
LAN
4
3
2
1
INTERNET
RESET
POWER
DIR-865L
Computer
12V
3A
USB
LAN
4
3
2
1
INTERNET
RESET
POWER
INTERNET
DIR-865L
Modem
5
Reconnect the power adapter to your
cable or DSL broadband modem and wait
for two minutes.
INTERNET
Modem
6
Connect the supplied power adapter into the power port on
the back of the router and then plug it into a power outlet
or surge protector. Press the power button and verify if the
power LED is lit.
12V
3A
USB
LAN
4
3
2
1
INTERNET
RESET
POWER
INTERNET
DIR-865L
Modem
Computer
Computer
This is a sample network conguration of the setup after you have
completed all the setup steps.
7
8
12V
3A
USB
LAN
4
3
2
1
INTERNET
RESET
POWER
INTERNET
DIR-865L
Computer
Modem
Laptop
To congure your router, go to the Manual Setup section below and
follow the steps.
INTERNET
Modem
Power Adapter
Ethernet Cable
If you experience issues registering this Router with your mydlink account, try
performing a hard reset by using an unfolded paperclip to press and hold the reset
button for 10 seconds while the Router is powered on. This may be necessary if
you have purchased an open box or resold unit.
U.S. and Canadian customers can contact D-Link technical support through our web site or by
phone. You can nd software updates and user documentation on the D-Link website as well
as frequently asked questions and answers to technical issues.
Before you contact technical support, please have the following ready:
• Model number of the product (e.g. DIR-865L)
• Hardware Revision (located on the label on the bottom of the product (e.g. rev A1))
• Serial Number (s/n number located on the label on the bottom of the product).
United States
Telephone: (877) 453-5465
Internet: http://support.dlink.com
Canada
Telephone: (800) 361-5265
Internet: http://support.dlink.ca
Technical Support
Note: Please go to http://support.dlink.com to
download the user manual.
Important for Manual Setup: For the quick setup wizard to work properly, you
must have a working Internet connection. Ensure that you are able to use your
computer to get on the Internet before disconnecting your computer from your
modem.
12V
3A
USB
LAN
4
3
2
1
INTERNET
RESET
POWER
If you are currently using a router, disconnect all the
cables connected to it before installing the DIR-865L.
Unplug the Ethernet cable from your modem that is
connected to your computer. Plug it into the LAN port
labeled 1 on the back of your router. The router is now
connected to your computer.
From the computer you connected the router to, open a web
browser and enter http://192.168.0.1 or http://dlinkrouter.
Press Enter and you will be directed to the D-Link Setup
Wizard page, which will detect your Internet connection type.
Follow the on-screen instructions to congure your Internet
settings. After setting up your router, you will be given the
option to create a mydlink account. Go to www. mydlink.com
and enter your acount information.