- 1 -
Chapter 1 Overview
Safety Instructions
The following accesses are referenced as SELV (Safety Low Voltage] in conformity with
EN.60950 standard:
•5 VDC supply Input
• Admin : V.24 - RS232 configuration port
• LAN: Ethernet interface
• SERIAL: serial interface (RS-530/V.35/V.11/X.21/V.24)
The power supply adapter is the main switching element. To totally disconnect the
equipment from the supply source we recommend you disconnect the power adapter from
the mains wall outlet. Thus this plug must be installed close to the equipment and provided
easy access. In order to comply with the safety regulations, it is imperative to use the
accessories (power supply and cables) provided with the equipment. When access to the
inside of the unit is necessary, it is imperative to disconnect the power cord from the mains
- only CXR maintenance qualified person are allowed to open the enclosure. For safety
reasons, any operation on the equipment and particularly opening the enclosure must be
carried out by maintenance person qualified by CXR. The equipment must imperatively be
returned to CXR in any case of anomaly, fall, loss of performance, water exposure, power
supply damage, , ,
Environment
The SeriaLAN is designed for residential or light industrial use within the following
environmental conditions:
• Storage Temperature 0 to 70 °C
• Operating Temperature: 0 to 45 °C
• Humidity: 0 to 90% without condensation
• Class: IP40
• Flammability: UL94-V0
• Equipment must not be exposed to excessive solar radiation
• Equipment must not be in contact with water. It must not be used near a water reserve
or in a wet location.
Install the equipment in an area well suited for its good operation and its longevity :
• Equipment must not be exposed to excessive solar radiation
• Equipment must not be in contact with water. It must not be used near a water reserve
or in a wet location.
• Equipment must be installed on a plane and horizontal surface, without vibration.
• Make sure the area is clean, dry and exempt of dust