Bahco BE-6990-IP20 Power Screwdriver User Manual


 
BE-6990-IP
Fixed-Setting Torque Screwdrivers
for TORX
®
and TORX PLUS
®
head screws
BE-6990-IP6 – IP15
Accuracy ±10% with a lifetime up to at
least 20,000 applications.
Material
Ergonomically designed 2-component
handle made of polyamide and
thermoplastic elastomer.
2-in-1 Set
with one TORX
®
and
one TORX PLUS
®
blade
BE-6990-IP20 – IP25
Accuracy ±6% with a lifetime up to at
least 20,000 applications.
Material
3-component handle made of polyamide,
ESD Nitrile Rubber, shore hardness
70 degrees and aluminium alloy with
anodisied black finish.
Applications
Torque Screwdriver BE-6990-IPwas specially developed for changing
cutting plates on automatic cutting machines, in order to ensure consistent
accurate cutting.
Incorrectly tightened screws produce an untidy cut surface and cause the
cutting plates to wear out quickly. Excessively high tightening torque leads
to rapid screw fracture.
Operation
Torque Screwdriver BE-6990-IPuses a built-in spring. It is preset to a fixed
torque and cannot be recalibrated. The blades can be changed.
Finish of the blade
Blade made of VANADIUM EXTRA. Blade nickel- and chrome-plated,
hardened over the entire length, tip black oxidized.
Sliding T-handle
with locking mechanism
and one TORX
®
and
one TORX PLUS
®
blade
Patent No.: US 6,487,943 B1 (USA), SE 513 457 (Sweden),
TW 143955 (Taiwan) Patent pending: Europe, Japan