Black & Decker 000 Work Light User Manual


  Open as PDF
of 7
 
Controls and Indicators
OPERATING INSTRUCTIONS
1 . Insert the S p o r t S p o t
®
spotlight 12 volt DC plug into the accessory socket of your
vehicle or a portable 12 volt power source, such as a jump starter.
2 . To turn on the S p o r t S p o t
®
slide the spring-loaded power switch to the ON position (up).
3 . To turn off the S p o r t S p o t
®
, release the spring-loaded power switch. It will slide back to
the OFF position (down).
USING THE HANGING HOOK
The Hanging Hook allows you to position the unit for convenient, hands-free operation.
CAUTION: TO REDUCE THE RISK OF PRODUCT DAMAGE:
• When Hanging Hook is in use, do not shake light.
• When light is hung by the Hanging Hook, do not shake the light or object that it is hanging
from. Do not hang the light from any electrical wires or anything that it is not secure.
• Only use the Hanging Hook for hanging this unit. The Hanging Hook is not intended to
support additional weight. Do not attach or hang anything additional to the light or risk of
breakage may occur.
USING THE BLUE-TINTED LENS
To use the included blue-tinted lens:
1 . With the unit turned off, remove the protective bezel.
2 . Place the blue lens over the face of the unit in the bezel grooves.
3 . Operate the unit normally.
Refer to the following illustration for guidance.
BLUE-TINTED
LENS
HALOGEN BULB
RUBBER
BEZEL
HEAVY DUTY CORD &
FUSED DC PLUG
SPRING-LOADED
ON/OFF SWITCH
HANGING
HOOK
4
CSL100MV ManualEN 062007.qxp 9/26/08 11:22 AM Page 4
 previous next