Black & Decker BDL300S Laser Level User Manual


 
WARNING: Read and understand all
instructions. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious personal
injury.
SAVE THESE INSTRUCTIONS
Safety Instructions
Do not operate the laser in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Use the laser only with the specifically
designated batteries. Use of any other
batteries may create a risk of fire.
Store idle laser out of reach of children
and other untrained persons. Lasers are
dangerous in the hands of untrained
users.
Use only accessories that are
recommended by the manufacturer for
your model. Accessories that may be
suitable for one laser, may create a risk of
injury when used on another laser.
Do not use optical tools such as a
telescope or transit to view the laser
beam. Serious eye injury could result.
Do not place the laser in a position which
may cause anyone to intentionally or
unintentionally stare into the laser beam.
Serious eye injury could result
Turn the laser off when it is not in use.
Leaving the laser on increases the risk of
staring into the laser beam.
Repairs and servicing MUST be
performed by a qualified repair facility.
Repairs performed by unqualified
personnel could result in serious injury.
WARNING: DO NOT DISASSEMBLE
THE LASER. There are no user
serviceable parts inside. Disassembling
the Laser will void all warranties on the
product. Do not modify the product in any
way. Modifying the tool may result in
Hazardous Laser Radiation Exposure.
Do not operate the laser around children
or allow children to operate the laser.
Serious eye injury may result.
Do not remove or deface warning labels.
Removing labels increases the risk of
exposure to radiation.
Position the laser securely. Damage to the
laser or serious injury could result if the
laser falls.
CAUTION: Use caution when drilling,
nailing or cutting into walls, floors and
ceilings which may contain electrical
wiring or pipes. Always turn off the
power when working near electrical
wires.
CAUTION: Use of controls or
adjustments or performance of procedures
other than those specified in this manual
may result in hazardous laser radiation
exposure.
The label on your tool may include the
following symbols.
V ................................volts
mW ............................milliwatts
nm..............................wavelength in
..................................nanometers
IIIa..............................Class IIIa Laser
For your convenience and safety, the
following labels are on your laser.
2
1
2
586017-00 BDL300S laser 7/30/03 8:51 AM Page 2