Black & Decker HEAT PRO DELUXE Heat Gun User Manual


 
HOT AIR TOOL ENGLISH 3
Important Safety Instructions
PLEASE READ AND UNDERSTAND THESE
INSTRUCTIONS PRIOR TO USE
Do not try to repair (or disassemble) the hot air
tool yourself. Repairs should be performed by a
qualified shop familiar with this hot air tool or
return it to HOME RIGHT (see Two-Year Warranty).
Opening of the hot air tool while under warranty by
anyone not authorized does void the warranty.
Hidden areas such as behind walls, ceilings,
floors, soffit boards or other panels may contain
flammable materials that could be ignited by the
hot air tool when working in these locations. The
ignition of these materials may not be readily
apparent and could result in property damage
and injury to persons.
When working in these locations, keep the hot
air tool moving in a back-and-forth motion, lin-
gering or pausing in one spot could ignite the
panel or the materials behind it.
DO NOT LEAVE OPERATING HOT AIR TOOL ON
SUPPORTING SURFACE WITH ITS NOZZLE
ATTACHED.
ƽWARNING: LEAD-BASED PAINTS
Extreme care should be taken when stripping
paint. The peelings, residue and vapors of paint
may contain lead, which is poisonous. Any pre-
1977 paint may contain lead and paint applied to
homes prior to 1950 is likely to contain lead.
Once deposited on surfaces, hand to mouth
contact can result in the ingestion of lead.
Exposure to even low levels of lead can cause
irreversible brain and nervous system damage;
young and unborn children are particularly vul-
nerable. Before beginning any paint removal
process you should determine whether the paint
your are removing contains lead. This can be
done by your local health department or by a
professional who uses a paint analyzer to check
the lead content of the paint to be removed.
LEAD-BASED PAINT SHOULD ONLY BE
REMOVED BY A PROFESSIONAL AND SHOULD
NOT BE REMOVED USING A HOT AIR TOOL.
Congratulations on your purchase of the
Black&Decker
®
Hot Air Tool. Like other power
tools, the Hot Air Tool is safe when properly
used but can be dangerous if misused. It is
the responsibility of the user to read all
instructions before use and use the Hot Air
Tool properly.
Read these instructions carefully and follow
all safety precautions. Failure to do so may
result in personal injury and/or property
damage.
If after reading this manual you still have
questions, call HOME RIGHT
®
’s Customer
Service department at 1-800-264-5442
(8:00 a.m.-5:00 p.m. CST).
Use your Black&Decker
®
Hot Air Tool for
the following tasks:
STRIP paint and varnish for refinishing
REMOVE bumper stickers, decals, linoleum,
Formica, veneers and laminates
SOFTEN adhesives, putty and caulk
THAW frozen locks, frozen pipes, roof
gutters and downspouts
LOOSEN rusted bolts, nuts and fittings
BEND plastic pipes and sheets
DRY and cure craft projects
DRY and cure automotive paints and
fillers (the product manufacturer's
recommendations must be followed.)
Product Registration Card
Please fill out and return the enclosed product
registration card or go to our website,
www.homeright.com, and register.