Filter
Top Products
7
Keep handles and switches dry, clean and free
from oil and grease.
20.Repairs
This tool complies with relevant safety
requirements. Repairs should only be carried
out by qualified persons using original spare
parts; otherwise this may result in considerable
danger to the user.
Additional safety instructions for rotary tools
Wear safety glasses or goggles when
operating this tool.
◆ Only use Black & Decker accessories
recommended for this tool.
◆ Never use any worn, cracked or damaged
accessories.
◆ Hold the tool away from your face when
switching on.
◆ Keep your fingers away from rotating
accessories.
◆ Be careful not to accidentally hit any foreign
objects in the workpiece.
◆ Be aware that accessories may be hot shortly
after use.
◆ If an accessory jams, switch the tool off and
unplug it before attempting to free the
accessory.
◆ Clamp the workpiece whenever possible,
especially when using cutting discs.
◆ Wear a dust mask whenever sanding.
◆ Thoroughly remove all dust after sanding.
◆ Take special care when sanding paint which is
possibly lead based or when sanding some
woods (e.g. MDF) and metal which may
produce toxic dust:
- Wear a dust mask specifically designed for
protection against lead paint dust and fumes
and ensure that persons within or entering
the work area are also protected.
- Do not let children or pregnant women enter
the work area.
- Do not eat, drink or smoke in the work area.
- Dispose of dust particles and any other
debris safely.
ELECTRICAL SAFETY
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
This tool is double insulated in accordance
with EN 50144; therefore no earth wire is
required.
Mains plug replacement (U.K. & Ireland only)
◆ Should your mains plug need replacing and
you are competent to do this, proceed as
instructed below. If you are in doubt, contact
an authorised repair agent or a qualified
electrician.
◆ Disconnect the plug from the supply and
remove the fuse from the plug.
◆ Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
◆ Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
◆ The cable wire colours, or a letter, will be
marked at the connection points of most good
quality plugs. Attach the wires to their
respective points in the plug (see above).
Brown is for Live (L) (2), blue is for Neutral (N) (4).
◆ Before replacing the top cover of the mains
plug ensure that the cable restraint (3)
is holding the outer sheath of the cable firmly
and that the leads are correctly fixed at the
terminal screws.
◆ If the plug has a fuse cover, make sure that the
fuse cover is fitted. Do not use the plug if the
fuse cover is missing or damaged.
Never use a light socket.
ENGLISH
RT650_UK.PM5 13-11-2000, 11:037