Filter
Top Products
44.
FIG. 30
Safety Power Switch
N
OTE:
T
his table saw has a safety feature that helps prevent
accidental starting.
T
o turn saw on:
l
ift switch lever by pinching side walls and pulling
up. This action starts the saw (Fig. 30)
T
o turn off power:
p
ush switch lever down to its original position
(Fig. 31).
To prevent unauthorized use, the switch can accommodate a
padlock with a long, 3/16" or 1/4” diameter shackle (not provided
w
ith table saw), (Fig. 31).
Basic Table Saw Operation
1
2
3
FIG. 31
FIG. 32
ON
MARCHE
ENCENDIDO
OFF
ARRÊT
APAGADO
Smart Guard System
The Bosch Smart Guard has been designed for modularity,
enabling the use of multiple combinations of the three main
components – Main barrier guards, Anti-kickback device, and
riving knife. Additionally, the riving knife can be quickly adjusted
to three positions (high, middle, and stored), depending on the
application requirement.
Component Parts (figure 32):
❶ Riving Knife
The Riving Knife is the central element of the Bosch Smart
Guard blade guarding system, serving as the attachment
point for both the Main Barrier Guard and the Anti-Kickback
Device. In the event that the Main Barrier Guard and Anti-
Kickback Device are removed, the Riving Knife maintains its
functionality as material splitter, and is adjustable to three
positions. Because of this adjustability, the Riving Knife can
be appropriately positioned for all cutting applications.
❷ Main Barrier Guard
The main guard is comprised of a pair of plastic barriers
attached to the metal upper barrier guard. The side barriers
(one to the left and one to the right of the blade) operate
independently of one another, maintaining maximum blade
coverage during cutting operations. The main guard
incorporates a quick-connect attachment point and can be
attached or removed from the blade guarding system
independent of the Anti-Kickback Device and Riving Knife.
Note: To best secure the main guard for transport, adjust
the blade to its lowest position. This keeps the guard tight
to the table surface and prevents damage related to the
guard swinging during transport.
❸ Anti-Kickback Device
In the event of kickback, the Anti-Kickback Device, (also
known as dogs, or pawls) is intended to help prevent the
board from being thrown in the direction of the user. The
sharp teeth of the pawls are intended to “catch” the material
in the event of kickback.
Attachment/Removal
(see page 26 for detailed instructions)
The three primary components of the Smart Guard blade
guarding system are designed for rapid attachment, adjustment,
and/or removal without the need for additional tools.
The Main Barrier Guard component can be quickly attached and
detached through the use of a quick release lever. The guard is
attached by seating the crossbar into the top of the Riving Knife
and engaging the locking lever. Following this process in