Bosch Power Tools PR20EVSK Router User Manual


 
-26-
5. Lightly press centering sleeve into sub-base
or templet guide to center.
6. Tighten the pan-head screws. Remove
centering sleeve.
7. The precision centering of the subbase or
templet guide is complete.
CENTERING CONE – Used when centering
the subbase itself or wide templet guides.
CENTERING SHAFT
(optional accessory)
TEMPLET GUIDE
(optional accessory)
SUBBASE
CENTERING CONE
(optional accessory)
FIG. 47
PLUNGE BASE
CENTERING SHAFT
(optional accessory)
Bosch Bushing External Internal Max
Templet Depth Diameter Diameter Bit/Cutter
Guide Diameter
ABB
RA1101 3/16” 5/16” 1/4” 3/16”
RA1103 9/64” 5/16” 17/64” 13/64”
RA1105 9/64” 7/16” 3/8” 5/16”
RA1107 5/16” 7/16” 3/8” 5/16”
RA1109 7/16” 1/2” 13/32” 11/32”
RA1111 3/16” 5/8” 17/32” 15/32”
RA1113 1/2” 5/8” 17/32” 15/32”
RA1115 3/16” 3/4” 21/32” 19/32”
RA1117 31/64” 13/16” 5/8” 9/16”
RA1119 31/64” 1” 25/32” 21/32”
RA1121 7/16” 1-3/8” 1-19/64” 1-15/64”
MAXIMUM BIT/CUTTER SIZE FOR
TEMPLET GUIDES
When using a templet guide, use only router
bit with cutters that are 1/16” less than the
internal diameter of the templet guide, such as
in the table below.
USE WITH THREADED
TEMPLET GUIDES
Also available as an optional accessory is an
additional adapter, the RA1100, that allows
use of conventional threaded templet guides
with the Bosch quick-release system.
BM 2610021461 06-12_BM 2610021461 06-12.qxp 6/26/12 1:38 PM Page 26