Filter
Top Products
9
Press the shaft lock to lock the spindle and use the socket wrench to loosen
the hex bolt counterclockwise. Then remove the hex bolt, outer flange and
blade.
To install the blade, mount it carefully onto the spindle, making sure that the
direction of the arrow on the surface of the blade matches the direction of the
arrow on the blade case. Install the outer flange and hex bolt, and then use the
socket wrench to tighten the hex bolt securely clockwise while pressing the
shaft lock.
CAUTION:
• The inner flange has a 25 mm diameter on one side and a 25.4 mm
diameter on the other. The side with 25.4 mm diameter is marked by
“25.4”. Use the correct side for the hole diameter of the blade you intend
to use. Mounting the blade on the wrong side can result in dangerous
vibration.
1. Shaft lock
1. Socket wrench
1
002156
1
002243
1. Blade case
2. Arrow
3. Saw blade
4. Arrow
1 4 3
2
002860
1. Spindle 2. Inner flange
3. Blade 4. Outer flange
5. Hex bolt 6. 25.4mm marking
1
6
25mm
25.4mm
25mm
2
3
4
5
002154