Filter
Top Products
Operating Procedure
In the "AUTO" position, the compressor
pumps air into tank. It shuts off
automatically when unit reaches its
maximum preset pressure. In the "OFF"
position, the pressure switch cannot
function and the compressor will not
operate.
IMPORTANT: Read
instructions before operating
compressor or damage may
result.
1. Turn switch to "OFF" position and
plug in power cord (See Figure 6).
2. Turn switch to "AUTO" position to
run unit (See Figure 6).
3. Turn regulator knob fully
counterclockwise. Compressor will
build to maximum preset pressure
and shut off.
4. Attach end of hose to regulator
knob. Turn regulator clockwise to
increase pressure going to the tool
that is being used.
This switch should
be in the "OFF"
position when connecting or
disconnecting the power cord from the
electrical outlet.
3
CW301300AJ, CW301400AJ
www.chpower.com
A
U
T
O
/
O
F
F
Figure 6
Notes
MANUAL