Campbell Hausfeld IB1000 Battery Charger User Manual


 
Battery Charger
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Safety Guidelines
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates
an imminently
hazardous situation which, if not avoided,
WILL result in death or serious injury.
Warning indicates
a potentially
hazardous situation which, if not avoided,
COULD result in death or serious injury.
Caution indicates a
potentially
hazardous situation which, if not avoided,
MAY result in minor or moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
IMPORTANT SAFETY
INSTRUCTIONS
RISK OF EXPLOSIVE GASES
1. WORKING IN VICINITY OF A LEAD-ACID
BATTERY IS DANGEROUS. BATTERIES
GENERATE EXPLOSIVE GASES DURING
NORMAL BATTERY OPERATION. FOR THIS
REASON, IT IS OF UTMOST IMPORTANCE
THAT EACH TIME BEFORE USING YOUR
CHARGER, YOU READ THIS MANUAL AND
FOLLOW THE INSTRUCTIONS EXACTLY.
2. To reduce risk of battery explosion,
!
WARNING
NOTICE
!
CAUTION
!
WARNING
!
DANGER
Operating Instructions IB1000
follow these instructions and those
published by battery manufacturer and
manufacturer of any equipment you
intend to use in vicinity of battery.
Review cautionary marking on these
products and on engine.
CALIFORNIA PROPOSITION 65
This product or its power cord contains
lead, a chemical known to the State of
California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling
GENERAL BATTERY
SAFETY
1. SAVE THESE
INSTRUCTIONS
This manual contains important safety
and operating instructions for battery
charger Model IB1000.
2. Do not expose charger to rain or
snow.
3. Use of an attachment not
recommended or sold by the battery
charger manufacturer may result in a
risk of fire, electric shock, or injury to
persons.
4. To reduce risk of damage to electric
plug and cord, pull by plug rather than
cord when disconnecting charger.
5. An extension cord should not be
used unless absolutely necessary. Use of
improper extension cord could result in
a risk of fire and electric shock. If
!
WARNING
IN701800AV 11/05
BUILT TO LAST
© 2005 Campbell Hausfeld/Scott Fetzer
extension cord must be used, make
sure:
a) That pins on plug of extension cord
are the same number, size, and shape
as those of plug on charger;
b) That extension cord is properly wired
and in good electrical condition; and
c) That wire size is large enough for AC
ampere rating of charger as specified in
Table 1.
6. Do not operate charger with
damaged cord or plug – replace the
cord or plug immediately.
7. Do not operate charger if it has
received a sharp blow, been dropped,
or otherwise damaged in any way.
Take it to a qualified serviceman.
8. Do not disassemble charger; take it
to a qualified serviceman when service
or repair is required. Incorrect
reassembly may result in a risk of
electric shock or fire.
9. To reduce risk of electric shock,
unplug charger from outlet before
attempting any maintenance or
cleaning. Turning off controls only will
not reduce this risk.
PERSONAL SAFETY
PRECAUTIONS
1. Someone should be within range of
your voice or close enough to come to
your aid when you work near a lead-acid
battery.
For parts, product & service information
visit www.chpower.com
See Warranty on page 5 for important information about commercial use of this product.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
AC input rating, amperes AWG size of cord
Equal to or But less than Length of cord, feet (m)
greater than
25 50 100 150
(7.6) (15.2) (30.5) (45.6)
0 2 18 18 18 16
6 8 18 16 12 10
81018 14 1210
Table 1 – Recommended minimum AWG size for extension cords
16
Notes
Notas