Campbell Hausfeld TL0517 Impact Driver User Manual


 
3/8 Inch Butterfly
Impact Wrench
Warning indicates a
potentially
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
NOTE: Information that requires special
attention.
Safety Guidelines
This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger indicates an
imminently
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
IN735300AV 8/10
See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions TL0517
© 2010 Campbell Hausfeld / Scott Fetzer For parts, product & service information
visit www.chpower.com
Locate model and date code on tool and record below:
Model No.: _____________________
Date Code: _____________________
Retain these numbers for future reference.
Description
This is a rocking dog type impact
wrench designed for DIY projects and
general purpose applications such as
maintenance, car repair, and lawn and
garden equipment. Not intended for
assembly line applications or heavy duty
usage.
Unpacking
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service.
Table of Contents
Description . . . . . . . . . . . . . . . . . . . . . 1
Unpacking . . . . . . . . . . . . . . . . . . . . . . 1
Safety Guidelines . . . . . . . . . . . . . . . . 1
Important Safety Information . . . . . . 2
Tool Components and
Specifications. . . . . . . . . . . . . . . . . . . . 2
Operating Instructions . . . . . . . . . . . . 4
Lubrication . . . . . . . . . . . . . . . . . . . . 4
Recommended Hookup. . . . . . . . . . 5
Regulator Operation . . . . . . . . . . . . 5
Speed Adjustment . . . . . . . . . . . . . . 5
User-Maintenance Instructions . . . . . 5
Troubleshooting Charts . . . . . . 6 and 7
Warranty . . . . . . . . . . . . . . . . . . . . . . . 8