Filter
Top Products
Page 6
For technical questions, please call 1-800-444-3353.
SKU 67501/68740
Specications
Electrical
Requirements
120 V~ / 60 Hz / 2 HP
Amperage
14A (Dedicated circuit
recommended)
Air Outlet Size 1/4”-18 NPT
Air Pressure
Auto Shut-Off @ 125 PSI
Restart @ 95 PSI
Air Tank Capacity 8 Gallons
Air Flow Capacity
4.5 SCFM @ 90 PSI
5.5 SCFM @ 40 PSI
Oil Capacity 5.6 oz.
Oil Type
SAE 30W non-detergent
Air Compressor Oil
(Sold separately)
(SKU 95048)
Decibel Level 88 dB @ 1m
Instructions for putting into use
Read the ENTIRE IMPORTANT SAFETY
INFORMATION section at the beginning
of this manual including all text under
subheadings therein before set up or use of
this product.
TO PREVENT SERIOUS
INJURY FROM ACCIDENTAL
OPERATION:
Turn the Power Lever “OFF” and unplug
the Air Compressor from its electrical
outlet before assembling or making any
adjustments to the compressor.
Note: For additional information regarding the parts
listed in the following pages, refer to the Assembly
Diagram near the end of this manual.
Functions
OFF
ON
ON/OFF
Power
Lever
Tank Pressure
Gauge (53)
Output
Pressure
Gauge
(77)
Pressure
Regulator
(74)
Pressure
Switch
(54)
Figure 1
ON/OFF Power
Lever
(On Pressure
Switch (54))
Oil Sight
Glass
(33)
Pressure
Regulator
(74)
Safety
Valve (73)
Tank Pressure
Gauge (53)
Output
Pressure
Gauge
(77)
Coupler for
attaching
in-line shutoff
valve, air hose
and tool
Drain Valve (66)
(Top View)
Work Piece and Work Area Set
Up
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children or
pets to prevent injury.
2. Locate the Compressor on a at level surface to
ensure proper pump lubrication and to prevent
damage to the unit. Keep at least 12” of space
around the unit to allow air circulation.
3. Route the power cord from the compressor to the
grounded wall outlet, along a safe path without
creating a tripping hazard or exposing the power
cord to possible damage.