Filter
Top Products
Carton Inventory
Overview
The Wireless Pedestrian & Vehicle Sensor is a
Passive Infra-Red sensor that detects movement of
people and vehicles, while allowing small animals to
pass through undetected. Each PIR Motion Sensor
has its own unique ID, for a secure radio link.
Base Station (not provided) can learn the signals of
up to four PIR Motion Sensors. The Base Station will
give a single beep for the first Sensor that it learns, a
double beep for the second, and so forth. Additionally,
multiple Base Stations can work with the same PIR
Motion Sensor to sound in different places.
PIR Motion Sensor
Assembly & Test
Step 1
Attach PIR Motion Sensor box to mounting plate with
large silver screw. Tighten screw until PIR Motion
Sensor stays in place when repositioned.
Model PIR2300R
Wireless Pedestrian & Vehicle Sensor
Passive Infra-Red (PIR) Motion Sensor
1
Swivel Bushing
Mounting Plate
Sun/Rain Shield
®
PIR Sensor
Antenna
Switch Settings
Step 2
Install 4 AA Alkaline batteries (not provided). (Lithium
batteries recommended for colder environments.)
LED light will flash.
Switch #1
Switch #2
Test
Button
Switch #1:.
Switch #2:
ON
OFF
1
2
OFF Low Sensitivity
ON High Sensitivity
(Default)
OFF 15' Detection Range
ON 30' Detection Range
(Default)
NOTE: To avoid unwanted detection of small animals
move Switch #2 to OFF.