Filter
Top Products
Page 4 For technical questions, please call 1-800-444-3353. SKU 98265
GROUNDING INSTRUCTIONS
TO PREVENT
ELECTRIC SHOCK
AND DEATH FROM INCORRECT
GROUNDING WIRE
CONNECTION
READ AND FOLLOW THESE
INSTRUCTIONS:
110-120 V~ Grounded Tools: Tools
with Three Prong Plugs
1. In the event of a malfunction or break-
down, grounding provides a path of least
resistance for electric current to reduce
the risk of electric shock. This tool is
equipped with an electric cord having
an equipment-grounding conductor and
a grounding plug. The plug must be
plugged into a matching outlet that is
properly installed and grounded in ac-
cordance with all local codes and ordi-
nances.
2. Do not modify the plug provided – if it will
not t the outlet, have the proper outlet
installed by a qualied electrician.
3. Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. The conductor with
insulation having an outer surface that
is green with or without yellow stripes is
the equipment-grounding conductor. If
repair or replacement of the electric cord
or plug is necessary, do not connect the
equipment-grounding conductor to a live
terminal.
4. Check with a qualied electrician or ser-
vice personnel if the grounding instruc-
tions are not completely understood, or
if in doubt as to whether the tool is prop-
erly grounded.
5. Use only 3-wire extension cords that
have 3-prong grounding plugs and
3-pole receptacles that accept the tool’s
plug.
6. Repair or replace damaged or worn cord
immediately.
125 V~ 3-Prong Plug and Outlet
(for up to 125 V~ and up to 15 A)
Grounding
Pin
7. This tool is intended for use on a circuit
that has an outlet that looks like the one
illustrated above in 125 V~ 3-Prong
Plug and Outlet. The tool has a ground-
ing plug that looks like the plug illustrated
above in 125 V~ 3-Prong Plug and
Outlet.
8. The outlet must be properly installed and
grounded in accordance with all codes
and ordinances.
9. Do not use an adapter to connect this
tool to a different outlet.
Tile Saw Safety Warnings
For Your Own Safety Read Instruction
Manual Before Operating Saw
1. Wear eye protection.
2. Use saw-blade guard and spreader for
every operation for which it can be used,
including all through sawing.
3. Keep hands out of the line of saw blade.
4. Use an appropriate push-stick when
required.
5. Know how to reduce risk of kickback.