Filter
Top Products
SKU 91482 For technical questions, please call 1-800-444-3353. Page 12
WATER TANK
(3)
MACHINE
FRAME
(11)
FIGURE E
BOLT
(93)
EXTENSION
TABLE
(94)
MAIN TABLE
(99)
FIGURE G
FIGURE F
ELECTRICAL RECEPTACLE
PUMP
(105)
PUMP POWER CORD
WATER HOSE
(PRE-ATTACHED)
(PLACE PUMP IN REAR
OF WATER TANK)
6. Plug the Power Cord of the Pump (105) into the electrical receptacle located on the
back of the Motor. Then, set the Pump (105) in the
rear
of the Water Tank (3), using the
four suction feet on the bottom of the Pump. (See Figure F.)
7. Attach the Extension Table (94) to the Main Table (99), using the four Bolts (93).
(See Figure G.)
8. If desired, this saw can be mounted to a Stand (ITEM 91483, not included). See the
manual included with the stand for installation instructions.