Filter
Top Products
8
Control Blocks and Interfaces
Control Blocks
A1 Full Feature Control Block
Part No. 436313
A6 Simple Control Block
Part No. 103862
Electrical Interfaces (not included with control blocks)
C10 Part No. 438223
Comprises :
2 x M8 Proximity Switches PNP (NO)
2 x Plug-in Cables
2 x Solenoid Valves (NC)
C11 Part No. 438233
Comprises :
2 x M8 Proximity Switches PNP (NO)
2 x Plug-in Cables
1 x Solenoid Valve (NC)
1 x Solenoid Valve (NO)
C12 Part No. 438243
Comprises :
2 x M8 Proximity Switches NPN (NO)
2 x Plug-in Cables
2 x Solenoid Valve (NC)
C3 Part No. 104002
Comprises :
2 x M8 Proximity Switches PNP (NO)
2 x Plug-in Cables
C5 Part No. 104842
Comprises :
2 x M8 Proximity Switches NPN (NO)
2 x Plug-in Cables
Solenoid Valves
ALL 24V DC
NC – Valve normally closed
NO – Valve normally open
Proximity Switches
All 10-30V DC
NC – Normally closed
NO – Normally open
AFD60 / AFT60 Control Block (Supplied fitted)
Electrical Inputs and Outputs
24VD.C. Switched Red
OV. Common Black
24VD.C. Switched Green
Switch Yellow
Switch Common White
Switch Blue
Air connection as above
except M port which is
negative at datum.
To invert signal use kit
Part No. 104822
Electrical Interface
Part No. 79532
24V DC
Comprises:
2 metre cable Adaptor
and O ring Interface block
Air Connections
R Air Return Port – Connects to breather port in nose of tool to provide
extra retract capability with heavy front end attachments (1/8” BSP)
ST Start Button – For manual operation and set-up
1 Remote Start Signal Port Pulse (M5)
SP Manual Stop Button – Interrupts cycle and returns AFD to datum
P Remote Stop Signal Port – Requires external signal pulse for
returning the unit to datum rest position (M5)
O Air inlet (1/4” BSP or 1/4” NPT)
M Work Cycle Complete Port – Used for sequence control with other
AFD’s clamps, index tables, etc (positive at datum position) (M5)
O Depth Stop Signal Port – Used with external circuits such as dwell or
pecking (1/8” BSP)
Retract rate adjustment control
Advance rate adjustment control
Feed rate adjustment control
F Feed port (1/8” BSP)
RN Return port (1/8” BSP)
Electrical Connections
S1 Start solenoid
S2 Stop solenoid
SW1 Datum return (M8 x 1.00)
SW2 Depth position (M8 x 1.00)