Filter
Top Products
CHAPTER
5-1
User Workstation Setup Guide for Cisco Unity Connection Release 2.x
OL-13207-01
5
Operator and Support Desk Orientation
Operators in your organization need information about Cisco Unity Connection that is specific to your
installation. In addition, if your organization has a support desk, the staff will need to be prepared to
answer the questions that users may ask, and to be aware of the resources that are available to assist them
in answering user questions.
See the following sections:
• Operator Orientation, page 5-1
• Support Desk Orientation, page 5-2
Operator Orientation
Operator orientation should address the same points as user orientation, but in greater detail. Operators
must be familiar with how users use Cisco Unity Connection. Depending on the size of your
organization, the operator may be the person users are likely to ask when they have questions about
Connection.
In addition to the information in the “User Orientation” chapter and the “Support Desk Orientation”
section on page 5-2 (as applicable), operators also need to understand the following concepts and tasks.
Roles of the Operator and the Automated Attendant
The way your organization uses the automated attendant determines what the operator responsibilities
are. The automated attendant is a call handler that is used in place of a human operator to answer and
direct calls by playing greetings and responding to touchtones. The automated attendant can provide a
menu of options (for example, “For Sales, press 1; for Service, press 2.”), and it can also provide
information (for example, “Our normal business hours are Monday through Friday, 8 a.m. to 5 p.m.”).
Directing Calls
Regardless of how your organization uses the automated attendant, many calls will go to the operator.
The operator must know how to direct calls to voice mail and to user phones. With Cisco Unified
Communications Manager (CM) (formerly known as Cisco Unified CallManager), you can program the
phone to direct calls to voice mail. For details on setting this up, see the tech note How to Transfer a
Caller Directly into a Mailbox, available at
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_tech_notes_list.html.
Forwarding Messages to Intended Recipients
If an operator also owns a call handler or system distribution list, make sure that the operator knows to
review messages frequently, and to forward messages as necessary to the applicable recipient(s).