Open as PDF
02/29/2008 9:52:40 AM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
Recessed lens directional luminaire with 2 inch square regressed pinhole
aperture utilizing a low voltage MR16 tungsten-halogen lamp. Modular
platform can be reconfigured from below the ceiling to accept a broad range
of lamp modules and optical elements. Platform is suitable for direct contact
with insulation and 2x8 residential construction. Platform + module +
element combination supports various lamp beam spreads for desired
optical distribution with excellent light control and low aperture brightness.
Galvanized steel plaster frame with
integral bar hanger receivers. Set-
screws provide positive horizontal
Matte black steel collar adjusts
vertically for 1/2" - 1" thick ceilings
and can be rotated +/- 7.5° thru the
aperture. Integral gun sights facili-
tate the use of guide strings or
laser lines. Shipped with a paint
overspray protector installed in the
Installed or removed thru the
aperture or from the top at 0°, 90°,
180° and 270° positions. Hot
aiming rotates 365°, tilts 45° and
locks in position using #2 Philips
screwdriver. Translating center
beam optics aligns axis of lamp
with aperture as lamp translates
from nadir to 45°.
Double wall aluminum housing
painted matte black for a visually
dark interior. Removable hinged
top allows for top access. All
fasteners are captive.
Closed cell gaskets achieve
restrictive airflow requirements
without additional caulking.
Captive preinstalled bar hangers
adjusts from 8-1/2" to 24" wide;
pass thru feature allows shortening
without removal. Captive nail
penetrates standard and engi-
neered lumber. Mounting flange
levels platform with ceiling.
Integral clip attaches directly to
Diecast aluminum splay has
truncated paramid with regressed
square aperture and integral glass
lens. Lens can be removed to facili-
tate painting to match ceiling
finish. Mousetrap type springs pull
flange tight to ceiling. Light trap
eliminates spill light at edge of
flange. Provided with both straight
and angle cut parabolic shielding
cone, shipped with angle cut
(7) 1/2" trade size pry outs, (3)
integral clamps for non-metallic
cable. Rated for (4) #12 thru branch
circuits. Wago® type push wire
connectors for field connections.
Self-resetting thermal protector
protects against improper lamping.
Integral dual output toroidal
magnetic transformer, 120V
50/60Hz input, 12V nominal 75VA
maximum output. Separate output
for circuits controlled by dimmers
compensates for losses in dim-
mers, improves color temperature
and lumen output.
Ceramic GX5.3 lamp holder
mounts to an aluminum heat sink
to dissipate heat. Connects to the
transformer with electrical quick
connects. Accepts 2 lenses, filters
or optional lamp snoot.
Thermally protected, IP labeled,
cULus listed for protected wet loca-
tions and ASTM-E283 AIRTITE(tm).
Suitable for direct contact with
2 Inch Square Lens Directional
LampWattage InputPower InputCurrent
(Nominal) (Watts) (Amps)
20 21 0.17
35 37 .031
37 39 0.32
42 44 0.37
50 53 0.44
ORDERING INFORMATION: Complete unit consists of platform, lamp module and optical element.
P408ICAT = 4” Square
Aperture IC Housing
MA4MR = MR16
Module, 120V Input
E4RPINSR = 2” Square
[Blank] = Self Flanged,
Matte White Flange
LSA16 = Matte black lamp
L Series - Filter Media For
MR16 lamps (See Acces-
sories specification sheet)