Craftsman F1294 Tool Storage User Manual


  Open as PDF
of 4
 
I €RAFTSM AN°I
Operator's Manual
BALL BEARING SERIES
F1294
Please indicate the following information from the service
part drawing provided.
Model Number:
Model Description:
*Product you purchased may vary from picture shown*
CAUTION:
Read and follow all Safety Rules and Operating Instructions before first use
of this product. Retain this document for future reference.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
SAFETY WARNINGS AND CAUTIONS:
• DO NOT stand on this product. You may fall which may cause personal injury.
• WEAR SAFETY GLASSES AND GLOVES when cutting the banding material. The
bands may snap which may cause personal injury.
• WEAR SAFETY GLASSES when removing or repositioning the slides. The tool
could slip which may cause personal injury.
• When moving this product, do not pull it. Push the product to prevent personal
injury.
• Handle and swivel casters must be attached on the same side of the product.
• USE THE BRAKES when not moving this product. This will prevent the product
from rolling, which may cause personal injury or product damage.
• BE CAREFUL when opening more than one drawer. The product may become
unstable and tip, which may cause personal injury or product damage.
• DO NOT step in the drawers. You may fall which may cause personal injury.
• Appropriately secure this product before moving it with a forklift.
• DO NOT tow with power equipment. The product could tip, which may cause
personal injury or product damage.
• DO NOT alter this product in any manner. For example, do not weld external
lockbars or attach electrical equipment. This may cause product damage or
personal injury.
• Keep the product on level surfaces. The product may become unstable and tip if
stored or moved on an un-level surface, which may cause personal injury or
product damage.
• Lock the drawers and doors before moving this product. The drawers or doors
could come open and make the product unstable and tip, which may cause
personal injury or product damage.
• When the cover is opened, be sure the cover stop is in the locked position. This will
prevent accidental closure and personal injury.
• BE CAREFUL when closing the cover. Remove hands before the cover closes
completely to prevent personal injury.
• The maximum weight for each drawer should be no more than 40 pounds.
• The maximum product weight, including contents, should be no more than 600
pounds for Roll-Aways.
• Close the cover and lock the drawers and doors before moving this product. The
drawers or doors could come open and make the product unstable and tip, which
may cause personal injury or product damage.
• Remove the work surface, if provided, from the cart before mounting the chest.
Failure to do so may cause the chest to slide off, which may cause personal injury
or product damage.
• When locking a chest, close the drawers before closing the cover for lock bars to
work properly.
• Spread the weight out evenly in the tote trays. If the weight is not spread evenly,
the contents could shift and fall out, which may cause personal injury, and damage
to the contents or tote tray.
F1294
2
next