Crestron electronic DIN-1DIMU4 Work Light User Manual


 
Crestron DIN-1DIMU4 DIN Rail Universal Dimmer
If necessary, double click a device to open the “Device Settings”
window and change the Net ID, as shown in the following figure.
“DIN-1DIMU4 Device Settings” Window
The ID code specified in the SIMPL Windows program must
match the Net ID of each unit. Refer to “
Identity Code” which
starts on page
13.
Program
Manager
Program Manager is the view where programmers “program” a Crestron
control system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it
into Detail View. Each signal in the symbol is described in the SIMPL
Windows help file (F1).
Example Program
An example program for the DIN-1DIMU4 is available from the Crestron
website (
www.crestron.com/exampleprograms).
Operations & Installation Guide – DOC. 6668A DIN Rail Universal Dimmer: DIN-1DIMU4 21