Crestron electronic DIN-1DIMU4 Work Light User Manual


 
Crestron DIN-1DIMU4 DIN Rail Universal Dimmer
Save
Override
Settings
The lighting level of each output can be saved as an override setting,
which can be automatically recalled when the Override mode is enabled.
NOTE: The control system program has a setting that can prevent
locally saving the override level settings. If this setting is enabled, the
display shows “Er” when trying to save override level settings. For more
information, refer to the SIMPL Windows help file.
To save the current lighting level values as override settings, press and
hold the OVR button for three seconds. The OVR LED blinks to indicate
the new override setting has been stored.
Reset
To reboot the DIN-1DIMU4, press the RESET button. The lighting
levels will be set to the levels currently specified by the control system
program. If the control system does not provide any values, the lighting
levels will be set to the previously set values.
Operations & Installation Guide – DOC. 6668A DIN Rail Universal Dimmer: DIN-1DIMU4 25