Crestron electronic DIN-1DIMU4 Work Light User Manual


 
Crestron DIN-1DIMU4 DIN Rail Universal Dimmer
Crestron Green Light™
DIN Rail Universal Dimmer:
DIN-1DIMU4
Introduction
The DIN-1DIMU4 is a four channel universal lighting control module
designed to support dimming of both forward and reverse phase type
loads. A single model supports both 120 and 220-240 Volt electronic and
magnetic low-voltage, incandescent, neon/cold cathode, two wire
dimmable fluorescent and non-dimmable lighting loads up to 5 Amps per
channel, 10 Amps total.
Features and Functions
Four channels of forward or reverse phase dimming
Auto load detection
120-240 Volt 50/60 Hz operation
Selectable non-dim mode
“Wilson” filter eliminates lamp flicker
Short circuit and overload protection
Master air gap relay
Override input
Cresnet
®
communications
Setup via front panel or software
Programmable functionality via DIN-AP2 or other 2-Series
control system
12M wide DIN rail mounting
Operations & Installation Guide – DOC. 6668A DIN Rail Universal Dimmer: DIN-1DIMU4 1