Dakota Alert AD-SSW Stud Sensor User Manual


 
PO Box 130 • 32556 East Main St. • Elk Point, SD 57025 p h : 605.356.2772 • f a x : 605.356.3662
Dakota Alert, Inc.
www.dakotaalert.com
AD-SSW (Shock Sensor)
1. Set RF Shock Sensor and CAD-03 dipswitches to match. The rst ve dipswitches need to be
set exactly the same with the last 3 dipswitches on the RF Shock Sensor set to OFF. (Note: On the
shock sensor, “off” is in the down position. On the Dialer, “off” is in the up position.)
2. Remove the battery insulator by pulling black tab from the back of the RF Shock Sensor. Unclip
the bracket from the back and mount in desired location.