Filter
Top Products
INSTALLATION INSTRUCTIONS
LAT-NR111
LED Tail Lights for 1969 Camaro
MAN#650170
Kit Includes:
Installation:
1. Remove the original bulb connectors from the bottom side of the housing.
2. Remove the plastic housing from the vehicle.
3. Remove the tail light lens by gently prying the housing away from the lens tabs.
4. Now is a good time to clean the lens and housing. If lenses are in bad shape a new set is
recommended.
5. Note that the screws and mounting plates are assembled differently for the driver side set and
passenger side set. The LED assemblies will sit in the housing at an angle similar to the back
side of the original lens.
driver side(screws and mounting plate offset to the left)
passenger side(screws and mounting plate offset to the right)
MAN#650170