Dakota Digital LAT-NR261 Work Light User Manual


  Open as PDF
of 2
 
INSTALLATION INSTRUCTIONS
LAT-NR261
LED Tail Lights for 1969 Impala/Caprice
MAN#650217
Kit Includes:
Installation:
1. Remove the two screws and lens on each tail light.
2. Remove the light bulb from socket.
3. Carefully remove the gasket from the housing. If the gasket is hard or brittle it should be
replaced.
4. Now is a good time to clean or replace the lenses and housings if necessary. If the lenses are
in poor condition a replacement set is recommended.
MAN#650217