Filter
Top Products
20
105635
D. REMOVING FIRING PIN
1. Remove two springs from outer liner assembly (see Figure 8).
2. Push in sear and pull out firing pin guide (see Figure 8). Line up sear with end of
slot. Remove spring and sear. Remove firing pin assembly. Remove push pin
(see Figure 9).
Figure 8 - Removing Springs and
Pushing in Sear to Remove Firing
Pin Guide
Figure 9 - Removing Sear, Spring,
Firing Pin Assembly, and Push Pin
Figure 11 - Removing Outer Liner Assembly from Housing
Ball
Bearing
F. REMOVING OUTER LINER ASSEMBLY FROM HOUSING
1. Grasp outer liner assembly and remove from housing.
2. Remove spring and ball bearing located at rear of liner.
Trigger Pin
Figure 10 - Removing Trigger Pin and Trigger Assembly
E. REMOVING TRIGGER ASSEMBLY
1. Remove trigger pin from housing with hammer and punch (see Figure 10).
2. Remove trigger assembly from rear of housing.
Outer Liner Assembly
Tool Body
Housing
Springs
Firing Pin
Guide
Sear
Outer
Liner
Assembly
Trigger Assembly
Spring
Sear
Spring
Push Pin
Firing Pin Assembly