Filter
Top Products
VL-MR4 Multi Resource Charger/PSU
The Hawk-Woods MR (Multi Resource) battery charger features include,
•
Universal Mains Input
•
Charging of all V-Lok Ni-Cad, Ni-Mh and Lithium Batteries
•
Compatible with Sony batteries
•
Able to charge NP1s using Hawkwoods adaptor
•
13.8V 60Watt AC Adaptor (PSU)
•
12V In-Car vehicle charging
•
Revitalise battery function
USER INSTRUCTIONS / SPECIFICATION
Mains Input: Suitable for worldwide use (90-260VAC 50~60Hz). This product is class 1 and
must be earthed. These chargers are CE marked and have been designed to comply with all
relevant safety/EMC regulations. Important Note: Do not cover vents!
Battery Charging: The VL-MR4 is a four channel sequencer quick charger, and suitable for
charging the following battery types,
•
Any NP1 Ni-Cad or Ni-Mh battery. (12-14V 1.5-4Ah)
•
Hawk-Woods Lithium Ion NP50/NP60/NP65 battery packs. (14.4V 50-60-65Watts)
•
All V-Lok battery chemistries
•
Suitable for charging Sony type V-Mount batteries
Recharge time – Fully Discharged V-lok battery packs
VL-32 V-Lok 13.2V 32 W Battery Pack (Ni-Cad) 75 mins
VL-65 V-Lok 14.4V 65 Watt Battery Pack (Li-Ion) 220 mins
VL-100 V-Lok 14.4V 100 Watt Battery Pack (Li-Ion) 270 mins
VL-160 V-Lok 14.4V 160 Watt Battery Pack (Li-ion) 340 mins
Charger Use: Select mains input via the rocker switch located on the rear of the VL-MR4.
Select charger function on the front of the unit. Connect the (Earthed) IEC mains cord supplied
and the RED charger LED will come on. Connect a suitable battery/batteries into the VL-MR4 for
charge.
Charge Status Indication
Yellow Battery has been accepted and is Charging
Yellow/Green Both LEDs flashing Faulty/Disconnected
Green Battery Charging complete Ready
Yellow – Green (LEDs alternately on/off = 80% charged or more for Lithium’s Only).
In-Car Charging: Check suitability of both the vehicle being used and it’s wiring before use.
Do not cover vents whilst in use!
•
DC Input: 11-15Volts.
•
Protection against reverse polarity fitted.
•
Low voltage detection/Indication.