Digital Concepts CH-3450/CAN Battery Charger User Manual


 
Welcome
Thank you for purchasing the CH-3450/CAN universal digital camera travel
charger. You can use this charger anywhere in the world to charge your
Canon digital camera and camcorder batteries. With its rapid charging
speeds, and easy to understand LED charging indicator, you will find that this
charger is a quick and simple solution to all of your charging needs.
Specifications
Item Number: CH-3450/CAN
Input: 100-250V AC 50/60HZ * 12V DC
Output: 4.2V===500M
8.4V===500MA
Using Your CH-3450/CAN Charger
CH-3450/CAN
Universal Digital Camera Travel Charger
User’s Manual
Finding the Correct Plate For your Canon Battery
In order to see which plate is suitable for your Canon battery, please
refer to the chart below:
Important Safety Instructions:
1. For indoor use only. Do not expose charger to rain, snow, or excessive moisture.
2. Never use an extension cord or any attachments not provided with this unit. This
may result in a risk of fire or electric shock.
3. Do not operate the charger if it has been subjected to shock.
4. Do not disassemble the charger. Incorrect reassembly may result in shock or fire.
For service, please contact the manufacturer of this device or a trained professional.
5. Always unplug the charger before attempting maintenance or cleaning.
6. Never alter the plug provided. Improper connection can result in shock or fire.
7. This charger is not intended for use by young children or infirm persons without
supervision.
8. Never use as a power source.
Sakar Warranty Card
This warranty covers the original consumer purchaser only and is not transferable.
Products that fail to function properly
UNDER NORMAL USAGE, due to defects in material or workmanship, will be repaired
at no charge for parts or labor
for a period of one year.
What Is Not Covered By Warranty:
Damages or malfunctions not resulting from defects in material or workmanship
and damages or malfunctions from
other than normal use, including but limited to, repair by unauthorized parties,
tampering, modification or accident.
What To Do When Service Is Required:
When returning your defective product (postage pre-paid) for service, your package
should include:
1. Copy of original bill of sale
2. A detailed written description of the problem.
3. Your return address and telephone number (Daytime)
MAIL TO ADDRESS BELOW:
Sakar International
Attention: Service Department
195 Carter Drive
Edison, NJ 08817
You may also visit www.sakar.com for further assistance if necessary or call our tech
support department toll free at (877) 397-8200.
If the battery plate inserted
in the charger does not
correspond to your battery,
you will need to remove it. To
do so, hold down the latch on
the battery plate, and pull it
away from the charger.
Locate the charging plate
that will fit your battery. You
can use the chart on the right
for assistance. Carefully snap
the charging plate onto your
charger.
Slide your battery onto the
charger. Be sure to match up
the contact pins on the
battery to the corresponding
markings on your battery
plate. The battery should
slide firmly into place.
Plug your charger into an
available electricity socket.
When it is plaugged in with a
battery inserted, a red light
will turn on to indicate the
battery is charging.
When your battery is fully
charged, the light on the
charger will turn green.
Use the DC car cable to
connect to one of your car’s
DC power outlets if you
would like to charge your
battery while you are on the
road.