D-Link DSL-G684T Router User Manual

DSL-G684T Wireless ADSL Router User Guide
Standards Compatibility and Compliance
The DSL-G684T complies with or is compatible with the following standards as recognized by their respective agencies.
ITU G.992.1 (G.DMT) compliant
ITU G.992.2 (G.lite “Splitterless ADSL”) compliant
ITU-T Rec. I.361 compliant
RFC 791 Internet Protocol compliant
RFC 792 UDP compliant
RFC 826 Address Resolution Protocol compliant (ARP) compliant
RFC 1058 Routing Information Protocol (RIP) compliant
RFC 1334 PPP Authentication Protocol compliant
RFC 1389 Routing Information Protocol 2 (RIP2) compliant
RFC 1483 IP over AAL5/ Bridged Ethernet over AAL5 compliant
RFC 1661 Point to Point Protocol (PPP) compliant
RFC 1877 Automatic IP assignment compliant
RFC 1994 Challenge Handshake Authentication Protocol compliant
Supports DHCP functions including: automatic assignment of IP address, use of subnet mask and default
gateway and provision of DNS server address for all hosts
RFC 2364 PPP over ATM compliant (PPPoA) compliant
RFC 2516 PPP over Ethernet compliant (PPPoE) compliant
RFC 2684 Bridged/Routed Ethernet over ATM compliant
IEEE 802.3 compliant
IEEE 802.3u compliant
IEEE 802.1d compliant
IEEE 802.3x compliant
Embedded web server support
Supports Dynamic Learning
Supports Static Routing
Supports NAPT for up to 4096 connections
Supports DHCP for up to 253 hot connections
Supports IGMP
Supports DVMRP
Supports ATM Forum UNI 3.1/4.0
Supports ATM VCC (Virtual Channel Circuit) for up to eight sessions
Supports Telnet and TFTP
Supports back pressure for half-duplex