Open as PDF
DSL-G684T Wireless ADSL Router User Guide
Us the Remote Log Settings window to set up logging to servers or computers that are located outside the LAN or
subnet of the Router.
Remote Log Settings window
Select the Log Level from the pull-down menu. The levels available are: Alert, Critical, Debug, Error, Info, Notice,
Panic and Warning. Type in the IP address of a receiver for the log message in the Add an IP Address field and click
on the Add button. Log message receivers that are added appear listed in the Select a logging destination pull-down
menu. These may be used at any time for other types of log messages. To remove a log message receiver from the list,
select it and click on the Remove button. Click the Apply button when you have configured the log message receivers.
Remember to save the settings to non-volatile memory.