Filter
Top Products
Configuration
- Registered – the endpoint is successfully registered with the system;
- Unregistered – the endpoint is unregistered;
- In-call – the endpoint has established a connection with a remote party;
- Failed – unsuccessful endpoint registration.
- empty field - no successful endpoint registration has occurred
includes two buttons – and .
is the button that you click to make a duplicate of the record
is the delete button used to remove the record.
You may wish to use the filter located on top of the Users table (see Fig. 12) to display selective
listings of configured extensions. User records can be filtered by the phone number, subscriber’s
name or the group the user belongs to and by any combination thereof.
Fig. 12 Search filter of Users page
When you intend to have displayed only those user records where the extension number starts
with 5, enter 5 in the field Phone and click . When it is necessary to further narrow
the search and display only user records that have phone numbers starting with 509, enter 509 in
the field Phone and click .
You can perform search by a digit or digits the phone number starts with and cannot search by
digits occurring in the middle or in the end of the number. You cannot enter regular expressions
in the filter field Phone either.
The search argument entered in the field Name is an alphabetic character or several characters
that can be found as a substring occurrence within a name string. The performed exact-match
search is case insensitive. For example, if you enter the letter A in the Name field and click
the search will return all user records where the user name includes characters A
and a, regardless of their number and position within the name string.
The search argument in the filter field Group is one selected from the drop-down list.
While using the filter you can define any single search argument, any combination of two
arguments (phone and name, phone and group, name and group) and all three arguments
simultaneously.
Click to bring up the user configuration form and configure the endpoint
properties. The user configuration form is shown in Fig. 13
DVX-7090 VoIP Router page 16 of 83