Filter
Top Products
Dual Servo Spin Welder User’s Manual
Dukane Manual Part No. 403-570-01Page 18
240 Volt AC Plug
(NEMA 6–20P)
240 Volt AC Plug
(NEMA 6–20P)
240 Volt AC Socket
(NEMA 6–20R)
240 Volt AC Socket
(NEMA 6–20R)
AC Power Switch
AC Power Cord
AC Power
The Dual Servo Spin Welder requires a 240 VAC 1–
phase outlet rated at 20 Amps. All machine models use
the same power cord and plug. The AC power cord is
permanently attached to the welder. The other end of
the cable has a 240 VAC, 1–phase plug shown in Figure
3–4. This is designed for a NEMA 6–20R conguration
wall receptacle shown in Figure 3–5.
Directly below the AC cord strain relief is the AC power
switch. The switch combines the functions of a power
switch and a 20 Amp circuit breaker. The breaker/switch
is identical on all models and is shown in Figure 3–6.
Figure 3–4 20–Amp 240V
Plug
Figure 3–5 20–Amp 240V
Receptacle
Figure 3–6 AC Power Switch and Power Cord