Fisher-Price b2875 Saw User Manual


 
Assembly
•While pressing the levers on the seat height adjusters, lift
them to position 4 on the frame front legs, as shown.
6
Seat Height
Adjusters
Position 4
•Position a frame so that the decorated side is outward.
Insert the back leg of a frame into the back base.
•Fit a screw retainer over the hole in the back base, as shown.
Insert a #10 x
7
/8" black screw through the screw retainer
and back base.
•Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
•Repeat this procedure to attach the other frame back leg to
the other side of the back base.
Screw
Retainers
Frame
Back
Legs
Frame
Decorated
Side
Back Base Hole
Back Base Hole
Press Lever
9
10
•Fit the seat assembly between the two frames.
Insert the seat bottom tubes into the sockets in each seat
height adjuster.
Seat Assembly
Seat Bottom
Tubes
Sockets
Sockets
Hints:
Be sure the seat height adjusters are in the same position
(position 4).
You may need to push the frames apart slightly to fit the seat
bottom tubes into the seat height adjuster sockets.
11
#10 x
7
/8" Black Screw - 2
SHOWN ACTUAL SIZE
Screw Retainer - 2
Hint: The #10 x
7
/8" black screws may have been assembled to
the screw retainers.