Filter
Top Products
Seat
Height
Adjuster
Seat
Height
Adjuster
Seat
Bottom
Tube Ends
Back and
Bottom View
7
Assembly
•Push each seat height adjuster
to be sure they are completely
on the seat bottom tubes.
• Insert a #8 x
3
/
4" screw through each seat height adjuster
and the ends of the seat bottom tube.
•Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Seat Bottom
Tube Ends
14
Push
Seat
Height
Adjuster
Push
Seat
Height
Adjuster
#8 x
3
/4
" Screw - 2
SHOWN ACTUAL SIZE
#8 x
3
/
4" Screw - 2
SHOWN ACTUAL SIZE
13
•From the back and bottom of the assembly, insert a #8 x
3
/4"
screw through both seat height adjusters and the ends of
the seat bottom tube.
•Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
•Fit the frame front legs onto the front base.
•Fit a screw retainer over a hole in the front leg.
• Insert a #10 x
7
/
8" black screw through the screw retainer
and front leg.
•Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
•Repeat this procedure to secure the other end of the
front base with the remaining screw retainer and #10 x
7
/8"
black screw.
Front Leg Hole
Front Base
Front Leg Hole
Screw Retainers
12
#10 x
7
/8" Black Screw - 2
SHOWN ACTUAL SIZE
Screw Retainer - 2
Hint: The #10 x
7
/8" black screws may have been assembled to
the screw retainers.