Fluke BP120 Battery Charger User Manual


 
BP120
Ni-Cd Rechargeable Battery Pack
Instruction Sheet
This Rechargeable Battery Pack is designed for use
with the Fluke ScopeMeter Model 123 and the Fluke
Power Quality Analyzer Model 43(B).
Chapter 2 of the Users Manuals for Model 123 and
for Model 43(B) explain how to exchange the Battery
Pack.
After installation, charge the Battery Pack for at least
5 Hrs. with the ScopeMeter or Power Quality
Analyzer switched off.
Nominal Voltage: 4.8 V
Capacity: 2.0 Ah
Lifetime: minimum 500 cycles at nominal charge
of 500 mA
Temperature Ranges:
Operating: 0 °C to 50°C
Quick Charging: 10°C to 40°C
Trickle Charging: 10°C to 45°C
Storage: -40°C to 60°C
Performing a Refresh Cycle every 3 months, will
contribute to the lifetime of the Battery Pack.
To prevent damage to Equipment or Battery:
Fully charge before use.
Keep the battery cool
Do not dispose in open fire
Observe polarity
Do not solder directly to the cells
Do not short circuit
Store Batteries outside the Instrument
BP120
Ni-Cd Rechargeable Battery Pack
Instruction Sheet
This Rechargeable Battery Pack is designed for use
with the Fluke ScopeMeter Model 123 and the Fluke
Power Quality Analyzer Model 43(B).
Chapter 2 of the Users Manuals for Model 123 and
for Model 43(B) explain how to exchange the Battery
Pack.
After installation, charge the Battery Pack for at least
5 Hrs. with the ScopeMeter or Power Quality
Analyzer switched off.
Nominal Voltage: 4.8 V
Capacity: 2.0 Ah
Lifetime: minimum 500 cycles at nominal charge
of 500 mA
Temperature Ranges:
Operating: 0 °C to 50°C
Quick Charging: 10°C to 40°C
Trickle Charging: 10°C to 45°C
Storage: -40°C to 60°C
Performing a Refresh Cycle every 3 months, will
contribute to the lifetime of the Battery Pack.
To prevent damage to Equipment or Battery:
Fully charge before use.
Keep the battery cool
Do not dispose in open fire
Observe polarity
Do not solder directly to the cells
Do not short circuit
Store Batteries outside the Instrument
BP120
Ni-Cd Rechargeable Battery Pack
Instruction Sheet
This Rechargeable Battery Pack is designed for use
with the Fluke ScopeMeter Model 123 and the Fluke
Power Quality Analyzer Model 43(B).
Chapter 2 of the Users Manuals for Model 123 and
for Model 43(B) explain how to exchange the Battery
Pack.
After installation, charge the Battery Pack for at least
5 Hrs. with the ScopeMeter or Power Quality
Analyzer switched off.
Nominal Voltage: 4.8 V
Capacity: 2.0 Ah
Lifetime: minimum 500 cycles at nominal charge
of 500 mA
Temperature Ranges:
Operating: 0 °C to 50°C
Quick Charging: 10°C to 40°C
Trickle Charging: 10°C to 45°C
Storage: -40°C to 60°C
Performing a Refresh Cycle every 3 months, will
contribute to the lifetime of the Battery Pack.
To prevent damage to Equipment or Battery:
Fully charge before use.
Keep the battery cool
Do not dispose in open fire
Observe polarity
Do not solder directly to the cells
Do not short circuit
Store Batteries outside the Instrument