Franklin R526A Router User Manual


 
Page 16 / 27 R526A_UG_Rev1.0_EN_29032012
- WEP(64bit or 128bit): Traditional WiFi certification program mode.
- TKIP/AES: Data encryption mode.
1. Select a Security Method from the security list.
2. Select the Encryption mode.
3. Enter a new network key in the Passphrase box. (Permissible characters are listed in gray just under the box.)
4. Click Apply.
Click Edit, you can redefine Security Profile. Also click Delete, delete Security Profile from the security list. But you
can not Edit or Delete to OPEN_SYSTEM (NONE) Profile. This profile has set as the default Secure Profile.
Note.
When you click Apply, you will need to reconnect to your router by closing your current view and re-opening a
browser connection to http://192.168.5.1/
Trusted MAC Filtering
MAC Filter allows you to limit access to your device to only those devices with a specified MAC address (a unique
code assigned to hardware such as network adapters).
Finding the MAC Address
The MAC Address is also known as a hardware or physical address for a device, usually a network adapter.
It consists of six pairs of numbers and letters (for example, 00:21:9B:1C:64:34).
You can view the MAC address for any device connected to the CDMA Mobile device in the WiFi Clients section of
the WiFi Status screen. (See “WiFi Clients” on page 14.)
Note.
When you enable this feature for the first time, ensure you add your wireless MAC first, then click Apply.
Advanced