Franklin R526A Router User Manual


 
Page 20 / 27 R526A_UG_Rev1.0_EN_29032012
3) Power Management
- Ethernet Port: You can set mode of the Ethernet port. Enable mode allows you to connect of using Ethernet
cable (UTP cable).
- Radio Off: You can use the Radio Off mode to customize your device to switch to a low power mode when not
in use. There are 10 minute increments from 10-60 minutes. Select Never to disable this power
saving feature. If you want to switch the WiFi Radio on earlier than the time you set in this
menu, you can easily push the power button one time lightly. A blue WiFi LED of indicates that
CDMA Mobile device is ready to connect.
- Power Off - The Power Off mode allows you to choose when your device will automatically power off, to save
battery life, due to inactivity. There are 10 minute increments from 10-60 minutes you can
select. Select Never to disable this power saving feature.
4) Factory Default
Click Update to reset your device to the defualt factory settings.
Firmware Upgrade
You can upgrade your device's configuration file to your computer. (The Version is showed current WiFi firmware
version.)