Filter
Top Products
258
CHAPTER 4 MENUS
■ Setting an output port
Figure 4.7-6 Output Port Setup Dialog Box
-Port Address
Specifies a port address.
-Mask Data
Specifies address mask. Only the addresses whose bits are 1 are to be compared.
-Data Size
Specifies a data output type. When Binary is selected, specify its size. (Byte/Word/Long)
-Output Type
Specifies a port data output destination.
-Output Port List
Displays the currently specified ports.
-Output terminal
When an output request is issued during program execution with [Output Type] set to [Terminal], the
Terminal Window is displayed. The output type also depends on [Data Type].