GE 45603 Work Light User Manual


 
Load Sensing
Load sensing is disabled when shipped from the factory. This
feature can be enabled if desired. Setting parameter 29 to a
value of 1 will enable the Load Sense function.
- Parameter No: 29
- Length: 1 Byte
- Valid Values = 0 or 1 (default 0)
Note: When replacing a burned-out light bulb, the load
sensing feature (if enabled) will automatically turn the light ON
when the new bulb is installed even if the Z-wave module was
turned OFF.
Restoring Factory Defaults
All Configuration Parameters can all be restored to their
factory default settings by using your primary controller to
reset the device.
Over-Current Protection
Over-current protection is provided by an internal fuse which
is not user serviceable. Check your home’s circuit breakers
before concluding that the product must be replaced.
Interoperability with Z-Wave
Devices
A Z-Wave
network can integrate devices of various classes,
and these devices can be made by different manufacturers.
Although every Z-Wave certified product is designed to work
with all other Z-Wave certified products, your controller
must include the appropriate device classifications in order
to control non-lighting Z-wave devices. As an example, the
45600 basic remote is designed only for controlling Z-Wave