Filter
Top Products
Basic Operation
The connected light can be turned ON in three ways:
With a Z-Wave remote
Manually with the push button on the Z-Wave module
By the Load-Sensing feature. Normally, the Z-Wave module
controls the ON/Off state of the connected light and power is
either turned On or Off at the module (either manually or by
the remote). If the switch on the connected light is used, the
Z-Wave control circuitry automatically senses that the light is
being turned On and activates the Z-wave controlled outlet,
providing power to the connected device. This feature is
disabled by default; see the section on advanced operation for
instructions on how to enable it.
Remote Control
GE Z-Wave remotes provide control of an Individual device,
Groups of devices and Scenes. Other brands of Z-Wave
Certified remotes may not offer as much flexibility in how you
can set up your lighting control network. Please refer to your
remote control’s instructions for details on its capabilities and
instructions for adding and controlling devices.
Manual Control
The Front Panel Push button on the 45603 Appliance Module
allows the user to:
Manually turn the connected equipment ON or OFF by pressing
the button.
- This is a toggle switch; if the device is OFF, pressing the button
turns the device ON and vice versa.
2. Include or exclude the module from the Z-Wave home
1.
2.
3.
1.